AQUATEX / APPLICATIONS
One system, many jobs underground.
Start from the problem. Each use-case below maps to the right product — AquaBox tanks for storage, treatment and pumping; BlockTech reservoirs for infiltration and load-bearing storage — and the buyer who usually specifies it.
BOTH SYSTEMS UNDER A WORKING PLANT YARD
Pick your problem.
Water accumulation & storage
Sealed underground reserves for water, wastewater and irrigation.
AquaBox · LTFStormwater treatment
Collect and clean stormwater before discharge or reuse.
AquaBox · SPSSewage pumping stations
Move stormwater or sewage where gravity won’t.
BlockTech · infiltrationInfiltration & attenuation
Detain rainwater, then release or percolate it away.
BlockTech · load-bearingUnder-parking storage
A reservoir that carries traffic load above it.
BlockTech · reuseFlow equalising & reuse
Buffer surges and store rainwater for technical reuse.
Water accumulation & storage
A sealed AquaBox reservoir stores water, wastewater or irrigation reserves below ground — including in difficult ground and quicksand regions — while the surface above stays usable. Sized from 10 to 120 m³ and beyond by adding modules.
Typically specified by — landscaping & irrigation contractors, developers, farms
STORAGE
LTFStormwater treatment
A buried treatment line in one body: collection, mechanical removal of large contaminants, then fine treatment through oil separation and sorption — sized to flow rate so treated water can be discharged or reused. Configurations from ~10 to 180 m³/h.
Typically specified by — civil / stormwater engineers, consultants, municipalities
Sewage pumping stations
A complete, ready-to-install pumping station for stormwater or sewage where gravity drainage isn’t possible — the AquaBox body with the pumping fit-out, delivered as a set and assembled on site.
Typically specified by — municipalities, utilities, civil engineers
SPS
INFILTRATIONInfiltration & attenuation
Fast-assembly block reservoirs detain rainwater on site and let it percolate into the soil — relieving overloaded sewers and meeting on-site attenuation requirements. High usable void with a small footprint.
Typically specified by — drainage engineers, developers, municipalities
Under-parking storage
BlockTech reservoirs carry vertical load, so the tank goes under the car park or access road and the ground above stays fully usable — storage where there is no spare land.
Typically specified by — developers, civil engineers, facilities
UNDER PARKING
REUSEFlow equalising & reuse
Buffer surge discharges and store rainwater for technical reuse — irrigation, washdown, process water — smoothing peaks and cutting mains demand.
Typically specified by — developers, facilities, sustainability consultants
Not sure which fits your site?
Tell us the problem and the volume — we’ll recommend the product and configuration and send a price.
REQUEST A QUOTE →